HHO Truck Kit HS 16 000-24V Nano Mini Plug N Play
Hydrogen system specially designed for American trucks with Diesel engines up to 16 000cc engine displacement and a 24V charging system.
Plug N Play – Easy to install and fully automated system, which saves up to 25% fuel and reduces emissions up to 78%
- Description
- Additional information
Description
Hydrogen system HS 16 000-24V is designed for American trucks with a 24V charging system. This is a Plug’N Play system, which is easy to install behind the cabin in any diesel truck. Does not need any engine modÂiÂfiÂcaÂtions or tamÂperÂing of the fuel manÂageÂment or elecÂtriÂcal systems.
No comÂputer softÂware proÂgramÂming, setÂting up, timÂing or mixÂture adjustÂments are required on the vehiÂcle.
This Hydrogen sysÂtem has a built-in autoÂmatic start & stop function, autoÂmatic safety shutÂdown, and regulates the production of Oxy-hydrogen gas based on the RPMs of the engine.
Easy & Quick installation
High qualÂity components
Fully autoÂmated Ampere limÂiter built-in
No run-on after shutÂdown
No backfire
Adjustable power ranges
Water level sensor
More than 3000 km. with one refill
Fully automated
Equipped with Dynamic PWM’s to control the amperes and production of HHO gas depending on the engine RPMs. There is a LED indicator installed near the dashboard to indicate when the reservoir needs to be refilled with electrolyte.
Most trucks make approximately 15 000km. per month which at minimum fuel saving 2 liters per 100km is equal to 450L. of diesel fuel saving!
Technical Data of the System
Dimensions of the system:
in centimeters: H 52 cm x W 40 cm x D 25 cm
in inches: H 20.5 inch x W 16 inch x D 10 inch
Weight: 28 kg.
Voltage: 24 –Â 29 VDC (from vehicles battery)
Material: Stainless steel INOX 316 Ti
Configuration of the plates: + NNNNNNNN – NNNNNNNN +
(+ positive, N-neutral, – negative)
Amperage: 3 to 16 Amp Automatic
Working surface: 4205 sq. cm
Capacity: up to 3 liters of gas per minute
The required ratio of the electrolyte (water-KOH): 5%-15%
The Plug N Play system includes:
#HHO Dry cell -1 pc.
#HHO tank/reservoir 8 liter – 2 pc.
#HHO bubbler – 1 pc.
tubing – 6m.
Wires:
Red 6 sq.mm. – 3.00 m
Black 6 sq.mm. – 2.00 m
Blue 1.5 sq.mm. – 3.00 m
fuse and fuse holder – 30 amps -2pc.
Inlet gas connector – 1pc.
All electrical connectors
Installation instruction + scheme
Instructions for use
Additional information
Weight | 28 kg |
---|---|
Dimensions | 44 × 29 × 54 cm |