- Description
- Technical data
- Package Contents
- Additional information
Description
Description
Hydrogen systems for Semi trucks are easy and quick to install and can be fitted to any diesel truck without any engine modifications or tampering of the fuel management or electrical systems.
No computer software, programming, setting up, timing or mixture adjustments are required to the vehicle
Fuel-saving systems have built-in: fully automatic start, automatic stop, and automatic safety shutdown control thanks to our Dynamic PWM for diesel 24V, which is included in this system.
Compact, easy to install
High quality components
Fully automated Ampere limiter built-in
No run-on after shutdown
No backfire possibility
Water level sensor
More than 3000 km. with one refill
Fully automated
Equipped with Dynamic PWM to control the amperes and production of Hydrogen gas depending on many different factors, such as temperatures, density of electrolyte, voltage, resistance, condition of your charging system, battery, etc. There is an LED indicator installed in the driver’s cabin near the dashboard to alarm when the reservoir needs to be refilled.
Most trucks make approximately 15,000 km. per month which at a minimum fuel saving of 2 liters per 100km is equal to 450L. of diesel fuel saving!
Technical data
Technical Data of the Hydrogen System
Dimensions of the Hydrogen system: H 70cm. X W 50cm. X D 30cm.
Weight: 30kg.
Voltage: 24 – 29 VDC (from vehicles battery)
Material: steel INOX 316L SS
Configuration of the plates: – NNNNNNNNNN + NNNNNNNNNN –
(+ positive, N-neutral, – negative)
Amperage: 3 to 30 Amp
Working surface: 4394 sq. cm
Capacity: up to 4.0 liters of gas per minute
The required ratio of the electrolyte (water-KOH): 5%-15%
Weather and water-proof casing.
Ventilated.
Package Contents
The Plug N Play Hydrogen system includes:
HHO Dry cell -1 pc.
HHO tank/reservoir 15 liter – 1 pc.
HHO bubbler – 1 pc.
tubing – 6m.
Wires:
Red 6 sq.mm. – 3.00 m
Black 6 sq.mm. – 2.00 m
Blue 1.5 sq.mm. – 3.00 m
Automatic fuse – 30 amps -1pc.
Inlet gas connector – 1pc.
All electrical connectors
Installation instruction + scheme
Instructions for use
Additional information
Additional information
Weight | 30 kg |
---|---|
Dimensions | 50 × 30 × 70 cm |