HHO Car Kit HS 2000

Suitable for petrol and diesel engines from 1000cc to 2500cc

The kit requires a control device such as Dynamic PWM for petrol or diesel engine, shown on the pictures. 
Dynamic PWM is not included in the kit, but you can add it to your order via the Product options on your right !!!

hho kit

Technical Data of the Dry cell

Dimensions of the HHO cell: 190 mm x 190 mm x 65 mm (incl. the connectors)
Voltage: 12 - 14.4 VDC (from vehicles battery) 
Material: steel INOX 316L SS
Configuration of the plates: + NNNN -
(+ positive, N-neutral, - negative)
Amperage: 3 to 30 Amp
Working surface: 2028 sq. cm
Capacity: up to 2 liters gas gas per minute
Required ratio of the electrolyte (water-KOH): 5%-15%
Hose connectors: Push In type

Package includes:

#HHO Dry cell -1 pc.
#HHO tank/reservoir 1.4 liter - 1 pc.
#HHO bubbler - 1 pc.
tubing - 4m.
Red  6 sq.mm. - 3.00 m
Black 6 sq.mm. - 2.00 m   
Blue 1.5 sq.mm. - 3.00 m
fuse and fuse holder - 30 amps -1pc.
Inlet gas connector - 1pc. 
All electrical connectors
Installation instruction + scheme
Instructions for use

All our HHO Products such as HHO Generators, HHO bubbler, HHO reservoir and HHO electronics and all of it's components are designed and produced in European Union and they comply with all standarts required for such a products 

Strong advantages of our kit

HHO gas production - Despite its compact size, the cell is relatively small in proportion to the quantity of gas production ensuring optimal operation during all engine loads and its rpms

Materials we use to create and produce our #HHO kits and systems are all Quality certificatated

The Stainless Steel plates we use is 316L - INOX with higher content of nickel, which is the rust resistant component in the steel. All the Stainless steel plates are laser cut with a very high precision. In addition the stainless steel plates passed through chemical and mechanical treatment, thus allow us to extend the working surface and longer work life

The rubber we use for our gaskets is EPDM rubber made by special recipe to meet our technical requirements, such as: temperature range between -50 to + 260 degrees and furthermore EPDM rubber is oil-resistant and in a square shape which allow us to use more working surface of each Stainless steel plate.The thickness of the gaskets is proper for normal conductivity process of the electrons between plates with a proper electrolyte ratio, which is very important for normal operation of the #HHO generator during temperature amplitudes like tough winter or extremely hot summer

The hose connectors we use are "Push In" model thus allow you just to plug the hose into the connector and that's all. Furthermore, the Push In connectors are 360 degree movable from its base to allow you easy installation. We use only PA12 hose, due to its high quality, instead of PVC, nylon, silicone or a garden hose, which are not reliable at all.

HHO tank/reservoir of the system with volume 1.4 liters is produced by us from fire retardant plastic to meet the requirements of the automobile industry for durability, long life and  compact size that would be easy installed in all cars. Our reservoir allows installation of #water-level sensor, which you can add to your order during the order process and it will come installed on your reservoir.The reservoir has non-vented cаp with secure gasket inside, that guarantees no leaks of electrolyte or #HHO gas. The function of the reservoir/tank is to keep more electrolyte in the system and to allow circulation of the electrolyte between the Dry cell and the reservoir. When the #Hydrogen is produced by the #dry cell a water vapor is produced as well. Water vapor may could carry microparticles from the electrolyte, which cause corrosion, so the connector through which the gas is returned to the reservoir is on lower level, so the produce #HHO gas bubbling through the electrolyte and the #hydrogen is cleaner from steam or any other particles. This is the first stage of cleaning the gas, but it is not enough for us and we always use secondary bubbler for more security

The Bubbler has four functions The first function is to clean totally the #HHO gas from steam and feed only clean gas to the air intake. The second function is to prevent reverse spark to the reservoir of the system and the bubbler acts as a flashback arrestor. The third and most important function is to determine the water level inside the bubbler, because if you drive long distance for instance and hold there more water vapor, the water inside will go higher level and could go to the air intake and probably into the cylinders. Imagine if water goes to your engine what it will cause?! Therefore we put a small pipe coming from the bottom of the bubbler and it goes next to the side wall of the bubbler and goes up with a certain height, so from this pipe the extra water will just drop down, but also it will determine the water level inside the bubbler and prevent overflowing of water to the air intake. 
The fourth function is that the same pipe is sucking air through it when you rev the engine in very high rpms, so this release the huge vacuum you have from the air intake and prevent sucking of water into the air intake. Only we offer such a secure bubbler!

Design During design of the #HHO generators we were guided by the fundamental factors such as high efficiency, performance, compact size, strength, quality, long life, easy installation, and last but not least a good vision

We recommend you to use #Dynamic PWM for petrol or diesel engine to control the amperes and the production of hydrogen depending on the RPM's of your vehicle!

Secondary elements of the HHO systems, like tank, bubbler and #Dynamic PWM are manufactured in accordance with the requirements of compactness, strength, stability throughout a temperature, stability of chemical bases, quick and easy installation and most importantly, consistency and certainty in connection with the cell.

We do not use relays, one-way valves and other non sense redundant items in our systems, because the relay it is integrated in the #Dynamic PWM and it is made much more reliable Start-Stop function and because the one-way valve it is always open during the engine work and there is a vacuum , which is opening the valve!

€ 240.00
In Stock SKU
Out of stock




Related products

HHO Generator HSG 4000

The Pro version HHO Dry cell for 12V suitable for engines between 2000cc and 4500cc

Technical Data of the Dry cell Dimensions of the HHO cell: 190 mm x 190 mm x  110 mm ...
€ 220.00
HHO Generator HSG 2000

The Pro version HHO Dry cell for 12V suitable for engines between 1000cc and 2500cc

Technical Data of the Dry cell Dimensions of the HHO cell: 190 mm x 190 mm x 75 mm (incl. the ...
€ 170.00
HHO Generator HSLG 3000

Flat and compact HHO Dry cell for 12V

Technical Data of the Dry cell Dimensions of the HHO cell: 100 mm x 100 mm x 130 mm (incl. the ...
€ 135.00
HHO Generator HSLG 2000

The very compact HHO Dry cell for 12V

Technical Data of the Dry cell Dimensions of the HHO cell: 100 mm x 100 mm x 90 mm (incl. the ...
€ 109.00
HHO Car Kit HS 2000
HHO Car Kit HS 2000
HHO Car Kit Fuel saver is suitable for diesel and petrol engine with fully automated dynamic PWM Saving fuel and emissions! Protects your engine of carbon build up! Saving fuel. Reduce emissions

Hydrox Systems

240.00 240.00 EUR 1
7000 7000 KGM
() 240.00 EUR HHO Car kits In Stock 001
Compare products