HS 8000 - HHO Tractor PlugN Play kit


 Mainly used for tracktors and agricultural machines from 4000cc to 12 000cc for  diesel engines.

Fuel saving of Agricultural machines may vary between 20% and 35% 

Package includes:
Hydrox Systems cell-1 pc.
Dynamic PWM 12 volts-1 pc.
tank - 1 pc.
bubbler - 1 pc.
tubing - 7 m.
Red 6 sq.mm. - 5.00 m
Black 6 sq.mm. - 2.00 

Blue 1.5 sq.mm. - 3.00 m
Automatic fuse - 1pc.
Installation instruction + scheme
Instructions for use


Price: €1,000.00
Send to friend Rate this product Add to wishlist

Hydrox Systems is a system produced in Bulgaria of the highest quality materials.

In the cell design were guided by fundamental factors such as: high efficiency, performance, compact size, strength, quality, longevity, quick and easy installation and not least a good look.

Optimized to the point where the summer can run on normal amps even without pulse modulator with correct dosage and at the same time has enough performance.

The system works well even in winter, it has a lower water consumption, low-amperage and low operating temperature.

Steel in the cell is 316 L, so that continuous operation will not see any change, any deposits or dirt, even after several months of work, the water in the system remains unchanged in color.

Cell Hydrox Systems has produced the most modern technology with laser cut plates to high precision, making it very reliable and long life, so that the cell has a 2 years manufacturer warranty.

Secondary elements of the system, tank and bubbler are manufactured in accordance with the requirements of compactness, strength, stability throughout a temperature stability throughout bases, quick and easy installation and most importantly, consistency and certainty in connection with the cell.

Other items such as tubing, wiring, relay, meter, button (on / off ), fuse holder and fuse are specially selected for presumption of quality, reliability and long life.

Technical Data
Dimensions: 190 mm x 190 mm x 180 mm - cell
Voltage: 12 - 14.4 VDC from vehicle
Material: steel INOX 316L SS
Amperage: 3 to 30 Amp;
a head start after 15Amp
continuous operation up to 20Amp
(depending on the dosage of water-electrolyte).
Working surface: 9408 sq. cm.
Capacity: 3-7 liters gas per minute at 20 Amp
MMW - 10.82

Package includes:
Hydrox Systems cell-1 pc.
Dynamic PWM 12 volts-1 pc.
tank - 1 pc.
bubbler - 1 pc.
tubing - 7 m.
Red 6 sq.mm. - 5.00 m
Black 6 sq.mm. - 2.00 m

Blue 1.5 sq.mm. - 3.00 m
Automatic fuse - 1pc.
Installation instruction + scheme
Instructions for use